Commodity risk assessment of maple veneer sheets from Canada

The European Commission requested the EFSA Panel on Plant Health to deliver a risk assessment on the likelihood of pest freedom from Union quarantine pests and pests subject to measures adopted pursuant to Article 30 of Regulation (EU) No 2016/2031 for the maple veneer sheets manufactured according to the process set out by Canada, with emphasis on the freedom from Davidsoniella virescens and Phytophthora ramorum (non‐EU isolates). The assessment was conducted for veneer sheets of up to 0.7 mm and up to 6 mm thickness, taking into account the different phases in the veneer production in a systems approach. Some of those phases, taken alone, including the heat treatment of logs in a water bath, the cutting into thin veneer sheets and the final high heat drying of veneer sheets are expected to be effective against some of the pests, without uncertainties, making the system approach fully effective. The panel considers that no insects would survive cutting of logs into thin veneer sheets of 0.7 mm and that Xylella fastidiosa will not survive the temperatures in the water bath and final drying of veneers. The degree of pest freedom for the different groups of organisms is generally very high with slightly lower degree of pest freedom for veneer sheets of 6 mm thickness because of lower temperatures reached in the final drying of veneer sheets compared to thinner sheets. P. ramorum is not expected to survive the high heat drying of thin veneer sheets, but it may survive the lower temperatures inside thicker veneer sheets. The Expert Knowledge Elicitation (EKE) indicated, with 95% certainty, that between 9989 and 10,000 veneer sheets (thickness 6 mm) per 10,000 will be free from living P. ramorum. For D. virescens, the EKE indicated, with 95% certainty, that between 9984 and 10,000 veneer sheets (0.7 mm) per 10,000 and that between 9954 and 10,000 veneer sheets (6 mm) per 10,000 will be free from living inoculum. For other relevant groups of pests, the greatest likelihood of pest presence was observed for wood decay fungi. The EKE indicated, with 95% certainty, that between 9967 and 10,000 veneer sheets (0.7 mm) per 10,000 and that between 9911 and 10,000 veneer sheets (6 mm) per 10,000 will be free from living wood decay fungi.